How to check robot controller type and robot type from backup?
Controler type from backup
-
krzych -
March 21, 2015 at 9:13 PM -
Thread is marked as Resolved.
-
-
Look at your SYSTEM.SYS file if you did a full backup. It should give you all the info you need.
-
There is only attached arm type. Could not find controler type.
/SYSTEM
//DATE : 2006/12/09 12:01:49
//SYSTEM NO : 4.157B(M)-00
//APPLI : HANDLING
//REVISION
CP02 : 4.171
SL01 :
RESERVE :
RESERVE :
RESERVE :
RESERVE :
CP01 : 4.15
IF01 : 2.00
SV#1 : 1.45/1.06
SV#2 : 1.45/1.06
SV#3 :
SV#4 :
SV#5 :
SV#6 :
SV#7 :
RESERVE :
PP : 3.2
OP :
IF02 :
RESERVE :
RESERVE :
RESERVE :
RESERVE :
RESERVE :
//ROBOT NAME
SK45-C00 0011_1111
//ROM ROBOT NAME
SK45-C00 -
This is data from an SK45 and has CP01 and CP02 and IF boards, therefore it's an MRC.