Posts by GillesG

What do you mean by version string in what files?
Btw i already fixed my problem by only taking the $machine file from the robot and taking the $roborcor file from the original office lite map. But will the difference of versions be any problem later on?

I want to make a programm in office lite and put it on a usb, put it in the robot and i should work. Now i'm trying to take the $machine and $robcore files (of the robot) and put them in a new configuration in office lite because there is no configuration where the position table is included. But when i open office lite it gives errors as seen in the attachement. Any idea if i can make this work? Maybe the problem is that the version on the pc is:
V5.4.OL
1.2.5406.0 B4
KS V5.4.95_95OfficeLite RT

And on the robot:
V5.5.10
2.0.6.6 B65
KS V5.5.64 RTAcc

I looked in the config file at this location c/KRC/HMI/Plugins/Samples/productionscreen/plugin/etc/archive/KRC/R1/system/. I replaced the config file from the pc with the one from the robot an couple of weeks ago. Now when i check that file there are only the bases from the robot and not the one i just created. Am i doing something wrong?

And how can i resample it?

Its on the laptop, and i can't connect the laptop to the internet nor put a usb stick in it because my professor is so afraid of viruses :p so i need to take pictures from the screen :s

I thought it might be more clear for people to help me

And how can i do that?

When i make a new base in office lite it automatically makes it an offset. I use exactly the same method as on the robot where it just creates a regular base...

Thx the solution was tooo simple...

I would like to create a new base on the pc (kuka office lite). I tried the 3 point methode but when i select the base and i create a new point it still creates it in base 0. Am i doing something wrong?

Thx guys i'll try it

Its possible to just take the extras from the robot and put them on the pc? What files do i need?

Yes this was the problem, thx, i told my professor and he confirmed that the optional software was not installed on the pc

V5.4

So what can i do to make it work? And i'm trying to make a program work that i made on the robot and make it simulate on the pc the arcsense is on the robot

Btw i took photos from my screen because i cant connect the laptop with the internet cause my boss is scared of virusses :p

Hello, next problem i encountered in my intership at the university of lyon.
I took a program from the robot and putted it on the pc, tried to open it but i could not open it. There were more then 10 errors (see picture)
I also posted 2 pictures with on the left side the program from the robot on the right side the approximatly the same program made on kuka sim pro. The programs are not the same, does anyone have an explanation for that and maybe a solution on how i can get that to work?

Greetings

He asked me if i take it out with my right hand do i have to stand on my right or my left leg??

Ok, thx i'll try to convince my boss, he is a little older and thinks the robot might explode when you dont remove it safely

There already is an extra monitor attached to the krc2, but its not like the "real" windows. There is no homescreen were i can see the usb in the corner right under