Does any body know where i can obtain replacement connectors for NX100 teach pendant cable (both ends male and female)or what make,model,type of connectors they are.
this is so we can carry out repairs to existing stock of cables.
Thanks
John
Teach pendant cables
-
johnybravo -
July 1, 2011 at 2:43 PM -
Thread is marked as Resolved.
-
-
Johny,
The only place to get NX teach pendant cable connectors is from Motoman, attached to teach pendant cables. Working for Motoman Canada we found the connector manufacturer and asked for the parts and tools to replace broken ends. Their answer was "we are under license to sell these connectors to Yaskawa Electric Japan only!" We tried to explain we are one in the same, but it was a no go.
By the way, we had a customer replace the cable ends with something they could get locally and got wires crossed up and blew up the power supply, main CPU, Pendant CPU and back plane for the rack. About $16,000 in parts not to mention the new cables and harnesses they had to buy.
-
Ok Thanks
Just have to buy new cables -
Robodoc...Could you say me who is the manufacturer of these connectors?
Thanks a lot!!! -
Sorry for resuming a post, I need only a couple of confirmation.
- The male and female connectors are the same for all the controller (NX100, DX100 and DX200)?
- Someone knows an european manufacturers of these parts ( if exists, of course)?Thanks in advance.
-
DDK Ltd. Circular connectors
http://www.ddknet.co.jp/English/products/circular.html
You can buy from Novitronic A.G. Zürich
-
Thanks a lot.
Do you know the code (for both male and female)? From the site seems the CM09 family? -
Please review attached picture
-
Great.
As I imagine, many thanks.