Hi
I,have a problem with AQS robot with KRC1 controller which is used in injection molding machine with 5 axis only
We procured the robot from German
after installing the robot it was not getting booted. so we reinstalled the KRC1
the backup files floppy is missing while transporting
now I am getting the following errors The Errors are
NR: 7 I/O driver not ready: DNDRV
NR: 1025 Error configration I/O driver DNDRV
NR: 1034 Error on writing, driver: DNDRV
is there any procedure for installing the devicenet with the MFC card?
If yes please guide me.
Can any one help me to solve the issue please?
Thanks & regards
K.Srinivasan