Hello everyone, for two KRC2 control cabinets, backup was created using a KukaU disk image. The first disk image creation failed with an error, and both the C and D image files were missing. The second control cabinet only has the C drive image file successfully created, while the D drive does not have an image file failure error
KRC2 Creating a disk image on a USB drive
-
wangyichao -
March 27, 2024 at 12:10 PM -
Thread is Unresolved
-
-
1
-
2
-
KukaU disk image.
A what? Do you mean a KUKA KSR USB drive?
The first disk image creation failed with an error, and both the C and D image files were missing. The second control cabinet only has the C drive image file successfully created, while the D drive does not have an image file failure error
What hardware version are these KRC2s?
What KSS version?
What steps did you follow while performing this backup? Full details.
-
For the first one, probably the problem is, that the robot is hybernated. Check 'Cold start' in reboot menu before switching off.