Hello all,
I'm hoping you can help me out here. I'm running a pretty basic simulation in Roboguide, and for the life of me I can't figure out the two issues that I'm battling right now. I have the universal subscription which has always worked in the past. I recently was "upgraded" to Windows 11, and now I'm having nothing but trouble. Hopefully someone else has seen this and knows the answer.
The first one is on the profiler. I can gather some profiler data, but the other check boxes just aren't there, They aren't greyed out, they're just missing.
And the second issue I'm battling is that when I run a simulation, it moves very slowly. Think glacially slow. A 12 second cycle is taking something like 5-7 minutes to run. And the tool/part leaves behind a streak of freeze frames. It's a lot like when you won windows solitaire back in the 90's (for those old enough to remember), and the cards would make that waterfall thing.
I'm going to try and attach pictures to this, so hopefully that works. But I'm pretty new to the forum thing, so bear with me if it doesn't.
Any help would be greatly appreciated.