2nd user C and D controllers seem to be holding there own and are refusing to join the industrial robotics graveyard at the moment.
I've had good success with D controllers with the below images as well as up to 128Mb versions too.
C controllers are more selective due to the development age and 32Mb and below are the official recommended types of compatibility.
So I thought I would start a thread with some images of known compatible PCMCIA cards.
This thread can then be used to direct newcomers to in order to try and obtain them if they require to reinstall firmware etc.
Please share your experiences by adding your own - Only for C and D controllers please.
If anyone has successfully partitioned/formatted other cards, then this advice would prove very valuable here too.