Cannot jog any axis.
Hear motor power on Shift Reset at the TP with any axis but does go away when +/_ axis is released.
Cannot jog any axis.
Hear motor power on Shift Reset at the TP with any axis but does go away when +/_ axis is released.
You do not release SHIFT after Reset and you jog in JOINT ?
Lerak
I saw the user name and for a second I thought I was looking a old post.
You are back !!!!!!!!! Welcome back
Hi Fabian !
Yes, long time too busy !
Glad to be back !
BenH, is there any Interference Check or DCS Activated ?