Has anyone had this issue. I have installed a different pendant on this robot and can not clear the SYST-043 error.
Arc Mate 120iBe Syst-043 error on new pendant.
-
KiwiMike -
April 14, 2023 at 8:37 PM -
Thread is Unresolved
-
-
Lemster68
April 14, 2023 at 8:44 PM Approved the thread. -
The message sais : TP disabled in T1/T2 mode.
And that is what is the matter.
So, turn off T1/T2, or turn on the TP. (and press reset)
If that don't work, you have the wrong pendant for the robot.
-
Yes, the Robot has no T2 on the Controller, just Auto and T1. Then controller is an A05B-2446-B100 and the new Pendant is a A05B-2301-C330, with the old Pendant being a A05B-2301-C301.