Hello All,
We have a KUKA KRC4 KR240 R2700 prime KSS 8.2.19.
We want to use a KUKA servo motor to drive a custom rotary table.
We have the following:
KPP 600-20-1x40 (ser-Nr.: 049314) (Article-Nr.: 00198260)
KUKA servo 1FK7101-5AY71-1SY3-ZS77 (Article-Nr.: 0000179161) (ME_270_180_30_S0)
My question is, how I must configure this in Wov.
Thanks,
Kind regards,
Nick