Hi,
I was having network issues with my KRC4 and Kuka recommended I restore to KSS 8.6.8 Build 411.
After performing the restore, I incorrectly selected "Robot" when prompted with the "Inconsistency between RDC Memory and Controller" prompt. This led to the robot being inoperable and a handful of error messages, shown in the image below.
I then tried to restore the robot MAM data. I tried to use the Robot Data -> Transfer Mames option on the HMI, which failed with the following two messages.
RDC3 -- Checksum error file on hard drive.
KSS03198 -- MAM import: Error 6 importing file /CIFSDev/Roboter/RDC/1086857.mam
Any advice on what to try next?
Thanks,
Rick