Configure input e output
-
robiguglielmi88 -
November 7, 2022 at 10:37 PM -
Thread is Unresolved
-
-
Make a cross connection from both inputs to the three outputs.
-
Make a cross connection from both inputs to the three outputs.
-
You do it in the IO configuration of RS just like you defined the signals. Just look for cross connection.
-
You do it in the IO configuration of RS just like you defined the signals. Just look for cross connections
-
The "actor" is the signal that acts on the resultant. You will need to use AND also. The manual for using robotstudio is available in the help tab.
-
The "actor" is the signal that acts on the resultant. You will need to use AND also. The manual for using robotstudio is available in the help tab.
-
-
Maybe offtopic, but it has to be said: Why are you writing in code brackets all the time?