hello
fanuc m20ia 20m present. I need to feed cnc. There is material feeding as shown in the picture.There are 160 points.I don't want to do 160.how can i do this easiest.I know how to do this with 'offset'. how can i do it easier?
hello
fanuc m20ia 20m present. I need to feed cnc. There is material feeding as shown in the picture.There are 160 points.I don't want to do 160.how can i do this easiest.I know how to do this with 'offset'. how can i do it easier?
HI
Are the circles same distance apart ?
The plate, is it going to be located exactly in the same place ?
Ok, I understand, You don't want 160 "regular" points
I don't think that you can do it easier the few PR offset and math, unless you put a camera and the vision tells you coordinates
if you sure the distance between the workpiece is the same, and the position is stable you can try to use the PALLETIZING option, I often using it as the program to make the picking with this array easier. but if you don't have any, you can try to use 1 PR as the basic and then make the calculation to complete the other task.