Have you tried contacting ABB like it says? Otherwise, try to close that box and see if you can do a B-Start.
No, that should not stop the controller. What directory is it saying it could not mount?
No, that should not stop the controller. What directory is it saying it could not mount?
our robot is connected to camera . maybe it made this unexpected error ?
Maybe
what should I do for solving this problem?
Follow the suggestions that the error message is giving.
Follow the suggestions that the error message is giving.
I don't know what should I follow. I had backup file from program. If I download back up file, will it solve my problem?
Try to restore a backup which was errorless and reinstall all new modules one by one. See if error is still there.
Try to restore a backup which was errorless and reinstall all new modules one by one. See if error is still there.
how can I reinstall the modulus. is there any manual about it?
If you can access the controller via RS you can restore a backup to the controller. After the restart of the controller, start loading only the modules from the latest backup.
When loading modules:
1 - Know directory of modules.
2 - Right click on your task which the modules should be loaded in.
3 - Select "Load Module" and go to the module directory and select the module to be loaded.
You can reset the service by call routine. Debug, Call Routine, View, View Service Routine, SERVICE INFO, GO to. HOLD Motor on and press play..... When done Cancel Call Rout.
