Hi everybody.
I bought a kawasaki robot and controller from ebay.
but there is no teach pendant, and I buy MFP from another place.
After connecting and turning on the power, the version of MFP is not compatible with the controller.
Can anyone help me how to use this MFP with that controller?
This is the version written on the back door label and uses the "ID" command
Robot: FS045N-A001
AS version: 334K4T6E
MFP software: T34K2T5E
and version displayed on MFP when power is turned on: T0400P4J.
Thank you very much.
Kawasaki FS045N-C, MFP is not compatible with the controller.
-
blacksky2411 -
July 25, 2019 at 5:02 PM -
Thread is marked as Resolved.
-
-
Welcome to the forum...………..
Unfortunately, I do not have the necessary files, may be someone else has them here and can offer them.
Alternatively, you have a North American Spec Model and may be if you contact Kawasaki Robotics Incorporated via:
https://robotics.kawasaki.com/en1/?_ga=2.132…0506.1564067702This is an obsolete product, but I think the files should still be available, but they may charge.....Worth sending them an email I think.