Hello every body. I have an S-420FD fanuc robot, which has an R-J system controller. I was trying to increase the number of Position Registers by making a controlled start (Turning the robot of and the on again holding the prev and next buttons). The problem is the controlled start is not happening. Does anyone know why is that?Andd how to get to the controlled start options on an R-J? Thak you for your help in advance.
Controlled Start on R-J controller
-
Jesus Ayala Leyton -
July 1, 2019 at 5:35 PM -
Thread is marked as Resolved.
-
-
Try using your F1 & F5 keys on power up
-
Jesus Ayala Leyton This thread is marked as resolved but it didn't give me the controlled start.
Also on a fanuc s420fd with R-J controller
-
We used to have an old R-J and an old RH here. Seems like I had to hold the USER1 and USER2 buttons on the controller while it boots to get a controlled start on one of them. Cannot remember which...