Hi guys,
I've never worked with robotics or programming before, that means I'm a completely stupid in this area.
I hope some of you have the time and patience to help me.
In my work I need to send a generic Kuka robot to take an object in a box and place it on the top of an actuator (The position of the objects and actuators are known). After that the robot should place this actuator on a generic XYZ coordinate.
The thing is that I don't have a robot or a simulation program to do it. I need to write the program with help of Orangeedit for example.
All the material I found explains how to teach the robot each point and I'm having trouble to find a material that shows how to write a program from zero.
I imagine this kind of program would be very simple but as I said I'm completely stupid in this area. I simply have no idea how and where to start.
If any of you have anything that could help me I would be really thankfull.
I've tried already some manuals from Kuka website and it is really confusing to me how they explain it specially because I don't have a robot.
PS: I'm totally beginner, so the most obvious information can be helpfull
Thank you guys and I hope I'm not asking too much