New to this forum!
I have a Rh-6 4 axis Mitsubishi robot with the following error codes. H1091, H1092, H1093, H1094.
I used the teach pendant to reset the origin. That did not solve the problem.
Any thoughts, suggestions?
RH-6 Robot Error code H109(1) - (4) Servo amp initialization Error
-
Fairview -
January 3, 2019 at 4:50 PM -
Thread is marked as Resolved.
-
-
You need to change the batteries that store the position data of the encoders (in the robot arm) and then perform the calibration.