Hello,
Using the pendant of the controller, I have backup all the files in a USB memory. Those files have extensions like .DAT, .DF, .DG, .DT, . GIF, .LS, .SMT, .SV, .TP, .VR. and others. I have use them to create a new project (from backup option) and I did some modifications. Now I am struggling finding a way to reverse the process. I would like to save the programs from ROBOGUIDE in a USB stick to load them back in the robot controller and Do I need all those files or just the .TP?. Thanks.
Save ROBOGUIDE Program in USB stick
-
Juanpj -
December 14, 2018 at 1:43 PM -
Thread is marked as Resolved.
-
-
On the virtual pendent at the bottom there are 3 tabs, select virtual robot settings. You can now define your UD1 path on your computer. once complete, backup the robot as you would normally do on a real controller. You can then restore the backup in a controlled start on the real controller.
-
What is important:
1. SV files - system files, if you modified settings etc. on the robot.
2. VR - variable files, for example if you modified PR, there is a posreg.vr file that keeps position registers.
3. TP - teach pendant programs.
So if you have modified only TP programs you need to reaload that certain TP programs.