All, I am in a tough spot here and FANUC support is not too responsive with my issue.
Problem:
I tried to install two new Software programs J924 and R791. I navigated through S/W Install, entered my PAC, AUTH, INTSTALL, then AUTOUPDT. The first program updated nicely, but the second one threw me this error: SYST-239 Auto Software Update Failed
The error log suggested that I restore backups and then try the auto update again. I backed up from my UD1\00\TEMP file like the error log asked, but I still cannot run a new AutoUpdate after the restoring of the backup. I cannot even jog my robot. Any help would be appreciated.
Errors from pendant:
INTP-105 (DIXON_MAIN_JV, 1) Run request
MCTL - 003 system is in error status
ABORT.L
SYST - 302 Please Power Off
cause: SYST-239 Auto Software Update Failed
Last Auto software update is failed.
Please restore backup from MED: 00 TEMP
and move the directory from MED:.
Directory is not processed
New software is seen as Installed when looking a S/W Install. After the Software update error