Does anyone know if a ABB- RT9 safety relay would work with a Fanuc robot using a R-30ib controller. The safety relay would be used with an interlock on a robot cell.
Safety Relay
-
David.mms -
July 9, 2018 at 9:44 AM -
Thread is marked as Resolved.
-
-
No needs to be dual channel
-
No needs to be dual channelThe ABB-RT9 is dual channel, on inputs and outputs.
Does anyone know if a ABB- RT9 safety relay would work with a Fanuc robot using a R-30ib controller. The safety relay would be used with an interlock on a robot cell.Wired correctly it would work. I would recommend you buy one for the fence interlock, and another for the external e-stop chain.