Hello.
I have a problem with setting the speed of circular motion on RS20N. I need circular motion arount Z axis.
I tryed couple of methods that I know but with no success.
1. I used the 7th parameter of TDRAW to set the speed, but does not work.
TDRAW 0,0,0,0,0,55,20
2. I used standart CIR1 and CIR2 with speed set to 0 which is 1% of working speed. Again not working.
CIR1 0 1 0 9 1
3. I used C1MOVE and C2MOVE with variables and setting global speed to 200MM/MIN.
SPEED 200MM/MIN ALWAYS
LMOVE k50a9
C1MOVE k50a1
C2MOVe k50a5
Here interesting is that LMOVE speed is changing when I change the SPEED, but C1 and C2 are not.
My question is: Am I doing something wrong or is there any other method that I can try?