HI
I install « LIB DN 24 DI16 DO16 » on the KRC2
1 / I change in devnet.int to
[krc]
DEBUG=0
BAUDRATE=500
[1]
Macid=5
2/ in the IOSYS.INT I activate the driver SO I remove ;
3/Add under [DEVNET] :
Inb0=5,0,x2
Outb0=5,0,x2
i use Resistor 120 ohm and other side 121 ohm
I get the error
“ configuration error I/O driver Dn2DRV”
PLEASE help me