hello,
sorry for the noob question. Do we need to wire X11. I don't have a safety plc or anything.
Thank you all in advance
hello,
sorry for the noob question. Do we need to wire X11. I don't have a safety plc or anything.
Thank you all in advance
If you want to move robot, you should wire it. You should also write more details in question https://www.robot-forum.com/robotforum/kuk…rum/read-first/
if X11 is your safety interface, then it has to be wired - completely (all inputs). check READ FIRST for details and download section for wiring examples.
if X11 is your safety interface, then it has to be wired - completely (all inputs). check READ FIRST for details and download section for wiring examples.
hey guys i have still trouble with my child (kuka)
i am just sure i have to do sth with my ESC_ tech.
i still have two red led on rectifier.
and today another fault message " failure in ESC safety loop" poped up.
can i find problem with X11 jumper????
If you want to move robot, you should wire it. You should also write more details in question https://www.robot-forum.com/robotforum/kuk…rum/read-first/
have u come up with my problem??
[size=1em]Sure did, my diagnosis is that you don't follow advice.[/size]
Thank you all for your answers
[size=2]you should mention details of your system. I guess this is some sort of KRC2 since you mentioned ESC board.
example jumper plug for X11 is in download section:
https://www.robot-forum.com/robotforum/man…obots/krc2-x11/
to get you more help, please provide details as explained in READ FIRST (include message number or better screenshot of all messages).
[/size]