Hello my friends
first of all thank all the members for their great help in my particular cases
I have a kuka 150, MG Krc1 model KR150l150sp / 2
There is some way to restore the software. without having a backup.
Someone will have the installer of the system or some steps to follow or how to proceed. To do a reset
I was operating the robot manually I turned it off
I turned it on after 3 months and it did not work, I checked the batteries and they are properly charged with sufficient amperage and voltage. check the wiring and everything was correct, so the conclusion I draw is that the software is the one that is damaged
in the line of states I figure the interpreter submit green with the letter s green
line of states actuation when I do not press the button figure red color letter O and when press the letter button I green color
The third option of the state line remains gray without any change. It does not present any lyrics
please I beg your help.
If photographs are required or the information I provide is very poor please let me know