User alarm number

$UALRM_SEV[10]
Minimum: 0 Default: 6 Maximum: 255
KCL/Data: RW Program: RW GET/SET_VAR: RW Data Type: BYTE
Name: User alarm severity
Description: This variable has 20 arrays and this number is the same with the user alarm one.
Each value designates the severity of each user alarm.
This default value is 6. This means STOP.L of error severity. You can set each severity under the
following specification.
WARN 0 STOP.L 6 STOP.G 38
ABORT.L 11 ABORT.G 43
Power Up: Changes to this system variable take effect immediately.
User Interface Location: SYSTEM Variables screen.