I WANT TO CUT MULTIPLE PARTS WITHOUT TEACHING WITH TEACH PENDANT,I CREATED *.LS FILE IN NESTING SOFTWARE NOW I WANT TO USE THAT FILE TO UPLOAD IN ROBOTIC PLASMA CUTTING ,AS I HAVE INSTALLED ASCII LOADER ETC..
ANY IDEA
sorry for poor english
HOW TO LOAD FILE CREATED FROM NESTING SOFTWARE TO CUT MULTIPLE PARTS IN TEACH PE
-
aircon345 -
February 21, 2018 at 9:15 AM -
Thread is Resolved
-
What controller model?
Sent from my SM-G930V using Tapatalk
-
Flash drive will work.
Or FTP if you have it on the network.
Sent from my SM-G930V using Tapatalk
-
If you are making an .LS from the nesting software, you will either want to have the ASCII UPLOAD option on the robot, or have an offline way to translate, which is possible for free with a workaround that uses RoboGuide from Fanuc. You would have to download and install that.
For a more automatic method via FTP loading to the robot, the R507 ASCII UPLOAD option is required (typically $500)
Looks like maybe a newer version of the same thing is "R796 ASCII Program Loader," but I don't know what the difference is between the two. -
R507 is used for R-J3 to R-30iA.
R796 is used for R-30iB and newer
Advertising from our partners
