Hey guys,
There is an external air blow ejector switch used to blow air into the mold to eject the part out. Now, the situation is that I want to remove that external switch and add it to the robot interface so that I can use it as the digital input/ output signal from the robot interface. How can I accomplish that
Please reply if anyone knows how to do that.
Adding an external air blow ejector control switch to the robot interface.
-
Atinder Singh -
December 7, 2017 at 9:17 PM -
Thread is marked as Resolved.
-
-
If your robot has output relays, and you can wire the existing valve to those relays in place of the existing switch, doing so is quite simple.
How to do it, I cannot say, since you have provided no details as to your robot brand, model, configuration, electrical schematics, valve type, voltages, I/O hardware, etc....
-
Thank you for the reply.