I have problem after I load new safety I should Sync the safety but how ??
I had try almost everything but the output are still off.
Inviato dal mio iPhone utilizzando Tapatalk
I have problem after I load new safety I should Sync the safety but how ??
I had try almost everything but the output are still off.
Inviato dal mio iPhone utilizzando Tapatalk
Hello;
EPS have two sync method
1- Signal from outside e.g. sensor mounted fixed position and signal going to EPS board.
2- SoftwareSync:
Debug->Call Routine->SoftwareSync and follow instructions.
Please note: Sync position and method must be defined in EPS configuration and it must be activated with password.
here it is for free.
Abb is great that way.. they have all their stuff out there for you..