We've got a used Fanuc 120ib robot with a RJ3 controller and we need to hook up a tregaskiss reamer to the robot. The reamer did not come with any of the cabling, can I just run a wire from the reamer to the controller? I also think that the controller is missing the outputs, would someone have a photo of what I should be looking for? I have very basic wiring skills into these but do understand most of the concepts. Thank you in advance.
Wire Tregaskiss Tip Reamer
-
ajjohns2003 -
February 8, 2017 at 3:17 PM -
Thread is marked as Resolved.
-
-
Really can't help, but here is one of our rj3ib controllers
-
Contact Tregaskiss and ask them for a wiring diagram of the reamer. Give them the model number. You may have to use a relay or two that are triggered by the robot outputs to operate the reamer.
-
If your welded is not a digital interface machine, your process I/O card usually has a few INs and OUTs for the dresser
really need a little more info