We've got a used Fanuc 120ib robot with a RJ3 controller and we need to hook up a tregaskiss reamer to the robot. The reamer did not come with any of the cabling, can I just run a wire from the reamer to the controller? I also think that the controller is missing the outputs, would someone have a photo of what I should be looking for? I have very basic wiring skills into these but do understand most of the concepts. Thank you in advance.
Posts by ajjohns2003
-
-
Program shift I use to copy certain welds in my program across the part instead of doing each individually.
Sent from my SM-N920W8 using Tapatalk
-
-
-
-
-
Turns out that it was the batch of wire, problem just went away on its own. Other companies purchasing from the same vendor also had some issues.
Sent from my SM-N920W8 using Tapatalk
-
We've swapped barrels twice but I believe that they were from the same batch. We have another order arriving Monday
Sent from my SM-N920W8 using Tapatalk
-
Thank you for your reply, I made a temporary riser to test if this would help.Sent from my SM-N920W8 using Tapatalk
Well even with this extension we are still getting a kink or knot in the wire, I always miss it when watching the drum. I'm banging my head against the wall.Sent from my SM-N920W8 using Tapatalk
-
Sh*t... I thought is was a possible partner for my trumpet-playing robot....
Thank you for your reply, I made a temporary riser to test if this would help.Sent from my SM-N920W8 using Tapatalk
-
I don't really understand the problem (as many others I suppose). Can you be more specific? What is getting jammed? Do you get any error messages on the robot?
Thank you for your reply, between the drum and the feeder we keep getting a knot or a snag and it always gets stuck in the feeder just before the rollers. Once the wire gets stuck we do receive an error that the arc has been lost. It was at the same point every time until I changed the routing of the whip from the drum, now it randomly happens at different points.Sent from my SM-N920W8 using Tapatalk
-
Good morning, I am working on robot one of 4 that we have setup for mig welding. As of late, one of the robot keeps getting a jam right before it goes into the wire conduct leaving the drum. It seams to be happening at the same weld every time. We have tried multiple drums and keep having the same issue. Anything that you can suggest is appreciated, I have searched around without any luck at this point.