Send me a PM and I will help you out with a training document I have.
Posts by joetripleh
-
-
As long as you are not doing anything out of the ordinary, you will only need to use a few of the 30+ settings. The first thing is to run a few test welds and get an idea of where the tracking current needs to be set. Once you have that you need to set it as constant and not feedback.
-
Contact Tregaskiss and ask them for a wiring diagram of the reamer. Give them the model number. You may have to use a relay or two that are triggered by the robot outputs to operate the reamer.
-
You will have to go to their programming class for Yumi. ABB does not give out certain documents without having the class. Ask whoever you bought the robot from for the documents.