Im putting together a parts list for a milling system - Im not an expert in integration by any means, and figured i would ask for any tips/or things that im missing.
Using a 2011 Fanuc R-2000iB 125L w/ R30iA Control
Ethernet/IP and Handlingtool w/ 7th axis amplifier installed
Things i need-
End of arm Spindle/Cables
Plc to run between PC and Controller/Cables
I am planning on using Solidworks to Design, and RoboMaster (MasterCam's Robotic Module) to export.
I appreciate any assistance provided!