Dear All,
My KRC4 is asking for basic inspection
Recently, I have cleared this message, but I don't have details about what to do when machine gives alarm about inspection messages like,
1-Basic Inspection
2-In line wrist maintenance
3-Main Axis maintenance
4-Minor Electrical Maintenance
5-Major Electrical maintenance
I have one document,mentioning what to check and replace but its interval is mentioned in years. can you Please guide what is required in above mentioned maintenance plans
Machine details are given below.
Config=All
DiskNo=0
LastDisk=1
ID=ac68aced-ab3f-4e9e-a74d-202a47df2b04
Date=2015-11-19_08-52-39
[Roboter]
RobName=LB59423_1LK
IRSerialNr=767820
[Version]
Version=V8.3.17
[TechPacks]
TechPacks=KUKA.DirectoryLoader|KUKA.SmartPadRotation|ProConOS 4-1|Profinet KRC-Nexxt|
KUKA.DirectoryLoader=2.2.1
KUKA.SmartPadRotation=1.1.0
ProConOS 4-1=4.1.4
Profinet KRC-Nexxt=3.2.0