Hi,
We are trying to interface a DX200/MA1440 Robot with a custom built Welding machine and have interfaced the same with the YEW Welding interface board. The wire feed/retract is working fine. The VWELD 1.2/2.0/3.0 instructions also displays the Analog voltage on the Welding machine Voltmeter. But when WE do ARCON, the YEW card Fuse gets blown. What can be the reason for this ? Now when we replace the fuse, and power on the controller, agains the fuse gets blown (without doing arcon). Please help as to what needs to be checked.
Any help is appreciated.
Thanks