Hi,
one of our robots is rocking. The base bolts into the concrete are pulling out of the concrete slowly. It appears the company who installed them did not resin bond the bolts. If we try and tighten the bolts they just pull out.
I've been told we could drill additional holes of the edge of the base plate and use another type of clamp which tightens down onto the base plate. I'm trying to purchase these, but do not know what they are called to search for them on the web. If anyone does can they let me know please?
Or, if you have any other ideas please let me know?
We have considered moving the robot and redrilling, but this is not an option for us at present.
All the best,
Sb439