Hello guys. My old generation MRC came up with an Alarm110, IAMP PARAM MODIFICATION. I am not sure what could have gone wrong. Recently I had this problem and I pull the MSVO1B Card and re inserted in and while the power was off and then turn the power back on in the controller and Alarm 110 went away, and I was able to get back the robot to run. Now I have done the same with this alarm now but, this time no luck, no fix back.
Can anyone tell me why this Alarm have come on. Are there other ways to fix the problems than swapping the MSV01B Card, until I get one order. Any suggestion is well consider, thanks.
PS. I tried to upload a picture on jpg format size at 23.7kb size and did not upload.
Administrator what other size or format is it possible to upload pictures in the forum, thanks.