I have replaced a hard drive in my krc2 but the software that it came with has a different robot configuration. I do have the correct Mada files for my robot, but not sure how to change it, can anyone share the steps to get this done
Thanks
Krc2 reconfigure software for another robot
-
bmike -
May 30, 2015 at 10:30 PM -
Thread is marked as Resolved.
-
-
on krc2 replacing mada is something like this:
- log in as expert
- cancel submit interpreter
- navigate to D: and copy correct machine data
- paste machine data into R1\MADA
- run submit interpreter -
Do you have a valid Archive of the robot from before changing the hard drive? Simply Restoring that Archive should resolve the issue painlessly.
-
Can the nada file from a win 95 system be used on win xp?
-
Yes. The MADA files are completely separate from Windows. All robot-critical functions and data are used by VxWorks. Windows is only present to operate the user interface (the pendant display and buttons).
-
ok, I will try this today and will let you know what happens,
Thanks
-
so it looks like my DSE will not support newer version, I goes I am stuck with win95.
Thanks for the help.