Just unpacked a new Agilus. Jogged in Safety Mode to test. Went through X11 and X55 jumper procedure this afternoon. Cleared all faults Except "protective stop 2 external" (KSS15117) which I can only assume is "safety stop 2" on pins 19 and 29. Tried it with and without and checked continuity on all jumpers. Any thoughts?
"protective stop 2 external" KRC4 Compact
-
detex -
August 21, 2014 at 5:05 AM -
Thread is marked as Resolved.
-
-
check download section of this board