Hi, everyone,
thanks in advance.
I got a used kuka kr150 and two controller of C1 and C2
but machine data on C1 and C2 not the right one.
I can jog robot w/ C1, but not C2 even I used the floppy disk (archive.zip) of C1 on C2.
Questions:
1. how can I get the right machine data for the robot that I can use both on C1 and C2? (I have model type and serial number)
2. how can I temporarily use the working machine data from C1 on C2 to jog the robot?
thanks again.