Hello everyone,
I am trying to make the calibration settings for iRVision for a robot mounting camera. I am using a Fanuc LR Mate 200iC from school.
My problem is that I made all the steps in PC Setup, I used the Internet Explorer 9 on 32 bit, I installed the Vision UIF Controls and when I start the Internet Explorer 9 and log to the robot controller everything works except the Vision Setup menu. When I press it instead of opening another Internet Explorer Window with the Vision Setup (the yellow page) it opens another window but it it remains still and on it it is written: "Logging in to controller" and on another line: "Please stand by ...". This is all and it isn't working further than this.
I repeat all the other menus from the iRVision are working. If I enter Vision Runtime I receive the camera feed. I can access the Vision Data Files and it starts the Vision Log. Another problem is that when I start the Vision Log first it gives an error: "FILE-055 MC not detected". This is written on a Internet Explorer pop-up and also when I enter on the robot teachpendant in iRVision at the Vision Log.
If anyone can give me any feedback and tell me how can I fix the page at the Vision Setup I will thank him very much