Hi,
We have Arcmate 120ic/10l with R30iA controller and kemppie welding machine with Ethernet/IP.
We are facing problem that the wire is not coming out from the Teach Pendent.
When we are pressing Wire+/- then the DO is activating(off-----> On).
Then we checked the Weld IO and found that Wire feed Speed and Voltage AO are not configured.
We tried to configured but "port assignment is invalid" message is coming.
AI/AO are configured as below:
AI
Rack Slot Channel
89 1 1
89 1 2
AO
Rack Slot Channel
89 1 1
89 1 2
Rupy