Hi all,
Long time, no post...
I just pulled our M16i robot with R-J3 off the shelf after a very long time out of commission. Upon start-up everything looks to be loading correctly until the very end. I get a message across the top of the TP screen that says "Power down if you want to recover."
Obviously, I powered down. When I powered back up, same message. I tried to jog the robot around a little and I get a MOTN error telling me the system is in fault condition. It won't reset. It won't recover whatever the heck needs to be recovered. I'm at a loss. Any ideas?
Thanks,
Doug