Hi
I used RJ3 with LE 455 with special adapter for analog communication.
Hi
I used RJ3 with LE 455 with special adapter for analog communication.
Hi
I worked with old kawasaki C controller. For example, there was no option for making circles. Extra expense.
Programing is totally different to fanuc. I don't like teach pendant in C controller (without keyboard).
But if price is adequate, why not.
Hi
The best way is to open your Teach Pendant. Number is at the backplate of LCD. This is the safest solution. There are a vary numbers of LCD. Of course on eBay
Good lack!
Hi
I've used RAL 1021 for yellows one. Looks good.
Hi
In my country Fanuc can sold spare parts to Teach Pendants. Another thing is price
I had similar case. I've bought LCD on internet. Installation is not a very big deal.
Hi
A year ago one operator hit by accident Teach Pendant. LCD was broken. I bought new LCD panel on internet, it wasn't expensive. Installation isn't difficult.
Regards
Hi
I have similar experience. I studied a lot of materials about it, visited producers. In theory everything is perfect, but is very difficult to find working installation. Try to speak to Cloos. I saw their systems, but I didn't speak to ordinary users, so I'm not sure about quality.
Regards
Lupus83
Hi
I had connected M16i RJ3 with Power Wave 455 throughout analog system. I wasn't able to run arclink on this system.
BootRom V2.00P
System V3.07PD
Robot S420F-HT
Robot S420F. Exactly system version I reply after weekend.
Hello
I have an old robot S420F with controller RJ (cabinet size C). I've lost system.
Can any one help me with this issue?
I contacted with Fanuc, but robot is older than service Team They cannot help me.
Fortunately this robot is for education, not in production.
Regards
Lupus
Hi
A year ago, I asked Fanuc about adaptive welding, seam tracking. They recommend SERVO ROBOT from Canada.
Hi
Do you have software image for this robot? I have problem with mine.
Hi
What kind of laser sensor do you use?
Hi
Could you send me private message with aoa and image files? I'll check it.
Hi
Check our settings. We have exactly the same equipment.
Hi
I have two robots with controllers R30iA. Let's say number 1 and 2. Number 1 has an external axis coordinated with robot. Everything works fine.
Is it possible to connect these robots throughout "robot link" in order to the robot number 2 took control over external axis?
Regards
Lupus83
Hi
If I understood well, you need a pcmcia card SRAM 2MB. It's not cheap.
Hi
In my opinion if robot is 10 years old, controller should be RJ3iB.
Hi
I've got similar price for this option. Normally we are using TAST and Touch sensing.