HI, all
I‘m a student; taking on the task of setting up a milling spindle on a KUKA robot KR C1.
The problem I’m having at the moment is to setup a DeviceNet. The modules I have are: PLC Micrologix 1100 from Allen Bradley there is a communication adapter module connected to it 1761-NET-DNI. Then I have a VFD-VE (Delta Variable Frequency Drive) for the spindle it is also connected with an adapter DN-02.
I have a RSNetworks software although I do not have a .eds file for the VFD that is another problem I will solve. If that is the way to do this.
The reason for the PLC is that it is supposed to handle the spindle logic, but without connecting or setting up the DeviceNet noting will happened at all.
So my question is what do I have to do to get this running?
All answers are appreciated.
Best regards
Josep