Hello Robot-Forum,
I am using MH5L with Dx100 Controller. I have already enabled the Ethernet function and successfully able to move the robot from my host pc by a small software developed on Visual c# using MotoCom32.
In order to move the robot from remote Pc, i have to enable Command Remote and Remote Mode on the PP.
My question is: Is it possible to control the robot entirely from the Host PC, so i want to disconnect the PP from the controller. I have tried to disconnect the PP while in remote mode, but stops any operation running from host Pc.
This forum has helped me lot. Thanks a lot for this amazing forum, looking forward for an solution.
Thanks