Hi All.
I had a robot Otc daihen roboland controller with Roboland arm, now i want to connect with CPVAS -350
Fibre has broke . not Interface .board. controller not operation.
Was big problem it s.not any manuals.
please help advise.thks
Help daihen Roboland controller
-
anthony -
October 12, 2012 at 5:35 PM -
Thread is marked as Resolved.
-
-
Hi sfranklin, please list exactly what you are requesting (your on several boards),
CPVAS > AX or CPVAS > DR5000 (roboland) or parts ?
OTC are a "minefield" for part numbers ,you need to be very precise
with part number & its "location"!, members will need these to look at Old machines
if you want parts.
See attached DR (EX simular) ) > welder interface options. -
Hi,I have " operation manual "
-
Hi all
I have roboland otc daihen bút when i turn on power ít alarm A50601-0100 ABSO encoder.
Please help me reset abso encoder . I have not ducument it
Thank -
Hi , send me a PM with your e-mail address and I'll send you a "DR " installation manual showing this alarm & reset procedure.
-
Thank you very much
This is mail : thanhroa@yahoo.com -
Hi, Zipped DR Installation file sent via "MailigFile" .
only just got back in Office.
rgds -
thank you very much