what is the expected behavior supposed to be?
Posts by admirk
-
-
so... what is the problem exactly?
-
what...!?
-
it appears that
tool Art# 00-130-449 is for standard cartridge
tool Art# 00-204-338 is for micro cartridge
-
post #9 actually states that issue is resolved. i missed that too when i skimmed over the topic...
-
that example was in KRL
p0,p1,p2 etc are FRAME which is a structure with X,Y,Z,A,B,C elements
A,B,C are rotations about axes Z,Y,X (that is order KUKA uses)
p2=p0 copies all elements of p0 to p2 (X,Y,Z,A,B,C)
so to access only Z element of p0, one can use
p0.Z = new_height
this keeps other elements at their previous value.
$NULLFRAME is a frame where all size elements are zeros. you can accomplish same by
p0 = {X 0, Y 0, Z 0, A 0, B 0, C 0}
-
so you have manual?
-
ABC 2-point should let you pick which axis and plane the points represent instead of forcing X axis and XY plane.
you mean you want to change tool axis from X to Z perhaps?
-
can't wait for things to get normal again...
-
is it? are you using ProfiSafe?
-
everyone is forced to work from home.
-
D1688 motherboard power up
-
not recommended. that image is already finalized so donor and recipient machine will have same SID and will not be able to network with each other.