Thank you!
it looks like we need the "PC Interface" option.
Is there an estimated cost for this?
Thank you!
it looks like we need the "PC Interface" option.
Is there an estimated cost for this?
Does ABB offer something similar to FANUC Remote iPendant on PC or Remote iPendant on HMI?
For the SMC unit how many physical valves did you have?
Thank you!
Hello All,
I want to use the PPABN (Pneumatic Pressure Abnormal) logic without having to run a cable from the base of the robot (pressure sensor) to the End Effector input.
Right now I have it wired into a regular digital input with a user alarm but want to monitor this input without constantly doing a Wait DI(108)=ON statement.
BG Logic can't call a user alarm either.
Any suggestions?
Does anybody have suggestions for creating a simple HMI display for a Fanuc R-2000iB with R-30iA control? I have read it can be done without a PLC using SNPX, but I'm having a hard time navigating the help files and documentation to get this configured.
I'm open to any suggestions, if it's simpler to use a HMI with PLC via ethernet that's fine.
I also have started using the HMI builder with MS Frontpage. Please let me know if you have experience with this and if it is a viable solution or option. I could I use the UOP with a standard monitor displaying the HMI function?
A lot of questions, thanks for any help!