Cables are good and tight, I have 480v between 3 phases.
still cant move rbt.
Posts by slamcity
-
-
ok, I ll check it, they did move the robot cabinet to the other side of the machine the other day. So they would have unplugged the cables.
prior to that, rbt worked fine.
will keep you posted.
thanx -
no alarms
-
I have this problem, when I try to enable the rbt, holding dead man, shift. I can hear the contactor pull in, but doesent stay in.
Any ideas?
Thanx -
Hi,
My robot, its in a specific program, it runs thru the program, at the end, it takes off into the middle of another program. I cant find where, its being told to do this. No jump labels, doesent call anything. The last command it has is MONITOR END HOLD ROBOT.
Has anyone come across something like this?
Thanx
Driving me nuts! -
Hi,
I have an issue, I have a style program, and in that program I call a pick Program, the trouble is it will only work in step mode.
When I try to call it out of step mode, it says [b]selected menu does not exist[/b], but the program is in the select menu.
INTP-222 also come up says call program failed.
Any ideas as to whats going on here?
Works in step mode, but not out of step.
Thanx -
Hi ALL,
I seem to have lost the heartbeat from the robot, I cycled power, problem still exists.
Where do I begin?
thanx -
Hi All,
I dropped in an image in the robot,
when I go thru a pick program and touch up points, it saves the point in a CONF:FUT 0-10,
but the original points before I touched them up were saved in CONF:NUT 000
Does anyone know why or how this happens?
when I try to run the program from points configured in FUT TO POINTS CONFIGURED IN NUT, I get this error.
MOTN-063 Position Config Change (G:1)WHAT THE FUT!!!!!
Thanx
-
Hi,
whats the difference between a macro, and a non macro?Thanx
-
Hi,
Can someone pleases explain to me this AR(!) register, how it works and should be used?
please and thanx. -
The variable you need to access in not in the variables menu, AT LEAST NOT ON VERSION 7.70 R-30iA
Here is a program that will change it to 20,
/PROG REFPOSSET
/ATTR
/APPL
/MN
1: $REFPOSMASK[1].$MAXREFPOSEN=(20) ;
/POS
/END -
Thanx, It worked perfect!!!
-
How can I increase enabled ref positions. I set for 20 ref position, but only first 10 will enable.
thanx -
no, just trying to make a list for myself
-
or, even if you have a Variable or two, please post.
Anything is good.
Thanx -
Hi All,
Does anyone have a list of Fanuc Variables, and what they mean, or do?
Thanx in advance? -
Thanx!!!!
-
Hi,
Can someone please explain a CNT move vs a Fine move.
I was told the robot scans ahead of the program on cnt moves, is that true?
Thanx -
hi all,
Im a new beginner in the robot field. Fanuc
looking for any advice.
I work in the auto industry.
Im having a hard time understanding things. like group inputs, outputs, register, etc and how they work.
what is the best thing for me to do? or start with?
Thanx